The
Electronic Variable Controller from Snow Performance
represents the latest technology in Water/Methanol
system control. The controller is designed to increase
injection pressure over a user adjustable range and
quickly shut off when boost pressure drops to prevent
misfire. No special MAP or MAF is required.
The controller has a .2
to 5 volt output signal (denotes 2.9 to 36.3 manifold
boost psi) that can be used for an input to other
applications. The small rugged design and easy setup
makes the EVC the logical choice for automotive/offroad
enthusiast.
Patented and Protected
US60/593.153
US60/593.154
Features
optimized injection quantity
over the full set range
allows to inject earlier
Save liquid
Potted Electronics and Rugged
Design for Under Hood Applications
Easy Adjustment and Setup
Operation: An external hose barb is provided to connect the
controller to manifold pressure.
The user then sets two dials that are located under the lid
of the controller.
The first dial tells the controller what pressure to turn on
and off. The second dial tells the controller the pressure
where maximum injection is required. Once the two dials are
set, the controller will linearly increase/decrease the
injection pressure over the set range.
Start pressure is adjustable from 0.03 to 0.68bar (.5 to
8psi).
The Full pressure is adjustable from 0.14 to 1.7bar (2 to
25psi).
Note that if the Full Psi dial is set below the Start Psi
setting, full injection pressure will occur once the Start
boost psi is reached.
